LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel Rails & Injectors >> Removal (B3000)

Removal (B3000)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove throttle body and upper intake manifold assembly. See UPPER INTAKE MANIFOLD . Disconnect fuel supply lines.
  2. Disconnect wiring harness at fuel injectors. Disconnect vacuum hose from pulse damper. Remove fuel rail bolts. Carefully disengage fuel injectors by lifting and gently rocking rail.
  3. Remove injectors from fuel rail, using a slight lifting/rocking motion. Place removed components in a clean container to avoid dirt or other contamination.
scientia non olet · About LEMON Manuals