Fuel Rails & Injectors: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Lubricate NEW "O" rings with light oil. Install 2 "O" rings onto each injector (one per injector if injectors were not removed from fuel rail). DO NOT use silicone grease.
- Install fuel rail and injectors in intake manifold. Be sure injectors are seated. Secure fuel rail assembly with retaining bolts. Connect injector wiring harness.
Lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. Carefully install fuel rails and injectors into lower manifold, one side at a time. To complete installation, reverse removal procedure.
- Lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. Carefully install injectors into fuel rail. Carefully install fuel rail into lower manifold using NEW manifold gasket.
- Clean and oil fuel rail bolt threads. Install fuel rail bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.