Disconnect (Spring Lock Coupler)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49-UN01-051) for 3/8" line, 49-UN01-052 for 1/2" line) over fuel line coupler. See Figure.
- Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.