Removal & Installation (Millenia 2.5L, MPV & 626 2.5L)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Drain engine coolant. Remove air cleaner, MAF sensor and inlet hose. Remove throttle body coolant hoses. Disconnect harness connectors and vacuum hoses from throttle body and upper intake manifold.
- Disconnect EGR valve pipe (If required). Disconnect line and harness brackets.
- Evenly loosen upper intake manifold nuts. To install, replace upper intake manifold gasket (if necessary). Install upper intake manifold bolts and tighten in crisscross pattern to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.