Removal & Installation (B2300, B2500, B3000 & B4000)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Disconnect throttle position sensor electrical connector. Remove snow/ice shield (if equipped) to expose throttle linkage. Remove throttle cable bracket.
- Disconnect cable from ball stud on throttle body. Remove air cleaner-to-throttle body air inlet tube. Disconnect canister purge hose from fitting beneath throttle body.
- Remove 4 throttle body bolts. Remove throttle body from upper intake manifold. Install NEW throttle body gasket. To complete installation, reverse removal procedure.