LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Power Steering System) >> Power Steering Pressure (PSP) Switch - 3.0L DURATEC (4V) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Power Steering Pressure (PSP) Switch
G01902381Courtesy of MAZDA MOTORS CORP.
  1. Remove the power steering pressure (PSP) switch.
    1. Disconnect the electrical connector.
    2. Remove the switch.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals