LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Wheels And Tires) >> Wheel Studs - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing. refer to WHEEL BEARING -- 2WD or WHEEL BEARING -- 4WD .
    Fig 1: Pressing Out Wheel Studs
    G01900150Courtesy of MAZDA MOTORS CORP.
  2. Press out the wheel studs.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals