LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Wheels And Tires) >> Wheel Studs - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheel bearing. Refer to WHEEL BEARING .
    Fig 1: Pressing Out Wheel Studs
    G01900149Courtesy of MAZDA MOTORS CORP.
  2. Press out the wheel studs.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals