Wheel And Tire: Removal

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Loosening Wheel Nuts

Courtesy of MAZDA MOTORS CORP.

CAUTION:

Do not use heat to loosen a seized wheel nut. Heat can damage the wheel and wheel bearings.

NOTE:

To avoid damage or scratching to the center cap, place facing up when removed.

Loosen the wheel nuts.
1. If necessary, remove the center cap.
2. With the weight of the vehicle on the wheels, loosen the wheel nuts.
Raise and support the vehicle. .

Fig 2: Removing Wheel And Tire Assembly
Courtesy of MAZDA MOTORS CORP.
Remove the wheel and tire assembly.
1. Remove the wheel nuts.
2. Remove the wheel and tire assembly, using a side-to-side rocking motion.