Windshield Washer Nozzle Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bonnet insulator.
Remove the windshield washer hose from the windshield washer nozzle.
Squeeze the tabs of the windshield washer nozzle.

Fig 1: Squeezing Tabs Of Windshield Washer Nozzle

Courtesy of MAZDA MOTORS CORP.

Pull the windshield washer nozzle out to remove it.
Install in the reverse order of removal.