Door Lock-link Switch

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the front door lock actuator connector.
Inspect for continuity between the door lock-link switch terminals using an ohmmeter.
- If not as specified, replace the front door lock actuator.
Fig 1: Inspecting Door Lock-Link Switch Continuity (1 Of 2)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Door Lock-Link Switch Continuity (2 Of 2)
Courtesy of MAZDA MOTORS CORP.