Rear Tilt Motor Inspection

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rear tilt motor connector.
Apply battery positive voltage to the rear tilt motor terminals and inspect the rear tilt motor operation
- If not as specified, replace the seat cushion frame.
Fig 1: Rear Tilt Motor Terminals Connection And Operation Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Rear Tilt Motor Circuit & Connector Terminals
Courtesy of MAZDA MOTORS CORP.