LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Control System (HVAC)) >> Climate Control Unit Wire Adjustment >> Air Mix Wire

Air Mix Wire

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the temperature control dial to max cold.
  2. Set the air mix link to max cold in the direction shown by the arrow and insert a screwdriver at the set hole.
  3. Connect the air mix wire to the air mix link.
  4. Clamp the air mix wire to the wire clamp.
  5. Verify that the temperature control dial rotates at its full stroke.
    Fig 1: Adjusting Climate Control Unit Wire
    G01931816Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals