LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Control System (HVAC)) >> Airflow Mode Actuator Inspection >> Full-auto Air Conditioner

Full-auto Air Conditioner

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect battery positive voltage to terminal E or F and ground to terminal F or E of the airflow mode actuator.
  2. Verify that the airflow mode actuator operates as shown Fig 2 .
    • If not as specified, replace the airflow mode actuator.
    Fig 1: Airflow Mode Actuator Movement Specification Table
    G01931768Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Airflow Mode Actuator Positions
    G01931769Courtesy of MAZDA MOTORS CORP.
    Fig 3: Airflow Mode Actuator Schematic
    G01931770Courtesy of MAZDA MOTORS CORP.
  3. Verify that the resistance between the terminals of the airflow mode actuator is as shown in the Fig 4 .
    • If not as specified, replace the airflow mode actuator.
    Fig 4: Airflow Mode Actuator Resistance Vs. Position Graph
    G01931771Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals