By-Pass Air Solenoid Valve (Millenia 2.3L)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Solenoid valve is located in right rear of engine compartment. See Fig 1 . Disconnect vacuum hoses and connector from solenoid valve.
- Apply light air pressure to a solenoid valve port. Air should not flow through valve. Using fused jumper wires, apply battery voltage to solenoid valve terminals. Air should flow through valve. Replace solenoid valve as necessary.