Miata A/T, Millenia & MPV Without ABS
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For MPV with Anti-lock Brake System (ABS), see wheel speed diagnosis in appropriate ANTI-LOCK article in BRAKES.
VSS is located on side of transaxle. Disconnect VSS connector. Measure resistance between sensor terminals. See VSS SPECIFICATIONS (EXCEPT PROTEGE & PROTEGE5) table. If resistance reading is not as specified, replace sensor. If resistance reading is as specified, repair or replace wiring harness.
VSS SPECIFICATIONS (MIATA A/T, MILLENIA & MPV WITHOUT ABS)
| Application | Temperature - °F (°C) | Resistance - Ohms |
|---|---|---|
| Miata A/T | 68 (20) | 387-473 |
| Millenia | -40-320 (-40-160) | 253-604 |
| MPV Without ABS | 68 (20) | 513-627 |