LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls - System & Component Testing) >> Engine Sensors & Switches >> Knock Sensor >> Millenia & 626

Millenia & 626

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect Knock Sensor (KS) connector. Using ohmmeter, measure resistance between KS terminal "A" (White wire) and KS body. Resistance should be about 560,000 ohms at 68°F (20°C). If resistance is not as specified, replace KS.