LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls - System & Component Testing) >> Air Induction Systems >> Variable Tumble Control System (MIATA 1.8L, Protege, Protege5 & 626 2.0L) >> One-Way Delay Valve Check

One-Way Delay Valve Check

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove one-way delay valve from VTCS shutter valve actuator vacuum hose. Blow into valve in direction of arrow on valve. Air should flow. Blow into valve in opposite direction of arrow on valve. Air should not flow. If flow is not as specified, replace one-way delay valve.

scientia non olet · About LEMON Manuals