VICS Solenoid Valve Check
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove solenoid valve. Apply air pressure to port "B". See Fig 1 . Air should flow from port "C". Using fused jumper wires, apply battery voltage to VICS solenoid valve terminals. Apply air pressure to port "B". Air should flow from port "A". Replace VICS solenoid valve as necessary.