Diagnosis & Repair Procedure
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Check for related service bulletins. Repair as necessary. Go to next step.
- Turn ignition on. Using scan tool, check for DTCs. See RETRIEVING DIAGNOSTIC TROUBLE CODES . If DTCs are present, go to appropriate DTC and repair as necessary. If DTCs are not present, repair short to ground in Brown/Yellow wire between MIL and PCM. If wire is okay, reprogram or replace PCM. On vehicles equipped with immobilizer system, reprogram ignition key identification numbers. See COMPUTER RELEARN PROCEDURES - IMPORT article in GENERAL INFORMATION.