DTC P0511: IAC Valve Circuit Malfunction: Condition
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
DTC is set when Powertrain Control Module (PCM) detects input voltage from IAC valve is out of range. This is a continuous monitor. MIL is illuminated when PCM detects malfunction during 2 consecutive drive cycles. Possible causes are:
- Idle Air Control (IAC) valve malfunction.
- Short or open circuit between IAC valve and PCM.
- PCM malfunction.