No.3 Engine Joint Bracket Installation Note

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Secure the engine and the transaxle using an engine jack and attachment as shown in Fig 1.

Fig 1: Securing Engine And Transaxle Using Engine Jack And Attachment
Courtesy of MAZDA MOTORS CORP.
Tighten the No.3 engine joint bracket bolt and nut in the order shown in Fig 3.

Fig 2: Number 3 Engine Joint Bracket Bolt And Nut Torque Specifications
Courtesy of MAZDA MOTORS CORP.

Fig 3: Tightening Sequence Of Number 3 Engine Joint Bracket Bolt And Nut
Courtesy of MAZDA MOTORS CORP.