Oil Jet Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata, 2004 Mazda MX-5 Miata, and 2003 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Apply compressed air to oil jet valve A and verify that air passes through oil jet valve B. If not, replace the oil jet valve.

Fig 1: Identifying Oil Jet Valve Ports
Courtesy of MAZDA MOTORS CORP.

Air Pressure
1. 167-225 kPa {1.7-2.3 kgf/cm ² , 25-32 psi}
Inspect the oil jet nozzle for clogs. Replace the nozzle as necessary.