LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Mechanical - Overhaul) >> Engine Disassembly/Assembly >> Cylinder Block Disassembly/Assembly (II) >> Connecting Rod Cap Assembly Note

Connecting Rod Cap Assembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata, 2004 Mazda MX-5 Miata, and 2003 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the matching marks on the cap and the connecting rod and install the connecting rod cap.
    Fig 1: Aligning Connecting Rod Cap Matching Marks
    G02831761Courtesy of MAZDA MOTORS CORP.