LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Engine Mechanical - Overhaul) >> Engine Disassembly/Assembly >> Cylinder Block Disassembly/Assembly (I) >> Oil Pump Assembly Note

Oil Pump Assembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata, 2004 Mazda MX-5 Miata, and 2003 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to a new oil seal.
  2. Push the oil seal slightly in by hand.
  3. Press the oil seal in evenly using the SST  .
    Fig 1: Installing Oil Pump Seal
    G02831731Courtesy of MAZDA MOTORS CORP.
  4. Install the new O-ring.
  5. Apply silicone sealant to the oil pump as shown.
    Fig 2: Applying Silicone Sealant To Oil Pump
    G02831732Courtesy of MAZDA MOTORS CORP.

    Thickness 

    1. 1-2 mm {0.040-0.078 in} 

  6. Install the oil pump.
  7. Cut away the portion of the silicone sealant that projects from the body toward the oil pan side.
scientia non olet · About LEMON Manuals