LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Engine Mechanical - Overhaul) >> Rotor Bearing Replacement >> Removal

Rotor Bearing Replacement: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the rotor with the internal gear at the bottom.
  2. Remove the adapter ring and the securing screw from the SST  .
  3. Remove the rotor bearing using the SST  .
    Fig 1: Removing Rotor Bearing
    G02830993Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals