LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Engine Mechanical - Overhaul) >> Rotor Assembly >> Oil Seal Assembly Note

Oil Seal Assembly Note

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily install the oil seal with the squared end of the oil seal spring fit into the slot of the oil seal.
    Fig 1: Installing Oil Seal
    G02831027Courtesy of MAZDA MOTORS CORP.
  2. Push in the oil seal using an old oil seal.
  3. Verify that the stroke of the oil seal is smooth and there is no catching by pushing the oil seal with your hand.
    Fig 2: Verifying Oil Seal Stroke For Smoothness
    G02831028Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals