LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Engine Mechanical - Overhaul) >> Rotor Assembly >> O-Ring Assembly Note

O-Ring Assembly Note

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply petroleum jelly to a new O-ring.
  2. Assemble the O-ring to the oil seal.
    NOTE:
    • Assemble the thicker O-ring to the inner oil seal (small radius), and the thinner O-ring to the outer oil seal (large radius).
    Fig 1: Assembling O-ring To Oil Seal
    G02831026Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals