LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Engine Mechanical - Overhaul) >> Main Bearing Replacement >> Removal

Main Bearing Replacement: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stopper screw. (High power only)
    Fig 1: Removing Stopper Screw
    G02831011Courtesy of MAZDA MOTORS CORP.
  2. Remove the adapter ring and the securing screw from the SST  .
  3. Set the stationary gear to the hydraulic press so that the gear faces upward.
  4. Remove the main bearing using the SST  .
    Fig 2: Removing Main Bearing
    G02831012Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals