Flywheel (Mt), Counterweight (At) Assembly Note

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Lock the flywheel (MT) or counterweight (AT) against rotation using the SSTs .

Fig 1: Locking Flywheel/Counterweight
Courtesy of MAZDA MOTORS CORP.
Apply silicone sealant to the locknut threads.

Fig 2: Applying Silicone Sealant To Locknut
Courtesy of MAZDA MOTORS CORP.
Tighten the locknut using the SST .
Tightening Torque
1. 392-490 N.m {40.0-49.9 kgf.m, 290-361 ft.lbf}
  
  Fig 3: Tightening Locknut
  Courtesy of MAZDA MOTORS CORP.