Engine Mounting/Dismounting: Dismounting
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Dismount in the reverse order of mounting.
- Tighten the stud bolt. (Only when using 49 L010 101.)
Tightening Torque
- 14.7-34.3 N.m {1.50-3.49 kgf.m, 10.9-25.2 ft.lbf}