Diagnosis & Repair Procedure
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure FREEZE FRAME DATA has been recorded. Check for related service bulletins. Repair as necessary and go to next step.
- Using scan tool, check for DTCs. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC P1569 is present, go to DTC P1569. See DTC P1569: VARIABLE TUMBLE CONTROL SYSTEM (VTCS) SOLENOID VALVE CIRCUIT MALFUNCTION . If DTC P1569 is not present, go to next step.
- Check for disconnected or misrouted vacuum hoses. Repair as necessary and go to step 5 . If vacuum hoses are okay, go to next step.
- Check VTCS shutter valve actuator operation. See SYSTEM & COMPONENT TESTING - MIATA, MILLENIA, MPV, PROTEGE, PROTEGE5 & 626 article. Replace VTCS shutter valve actuator as necessary and go to next step. If VTCS shutter valve actuator is okay, go to next step.
- Start engine and allow it to reach operating temperature. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Check for DTCs. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC P1512 is present, replace PCM and go to next step. See REMOVAL, OVERHAUL & INSTALLATION article. On vehicles equipped with immobilizer system, reprogram ignition key identification numbers. See COMPUTER RELEARN PROCEDURES - IMPORT article in GENERAL INFORMATION. If DTC P1512 is not present, go to next step.
- Perform DTC confirmation procedure. See DTC CONFIRMATION PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Check for DTCs. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If any other DTC is present, go to appropriate test.