LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Engine Mechanical [Intake-Air System L3]) >> Intake-Air System Removal/Installation >> Vacuum Hose (Purge Solenoid Valve) Installation Note >> Notes

Vacuum Hose (Purge Solenoid Valve) Installation Note: Notes

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the vacuum hose (purge solenoid valve) onto the respective fittings, and install clamps as shown.
    Fig 1: Installing Vacuum Hose & Clamps
    G01929788Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals