Cylinder Head
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD
| Application | Specification | |||
|---|---|---|---|---|
| Cylinder Head | ||||
| Height | 4.8996-4.9035" (124.45-124.55 mm) | |||
| Grinding Limit | .006" (.15 mm) | |||
| Maximum Warpage | .004" (.10 mm) | |||
| Valve Seats | ||||
| Intake Valve | ||||
| Seat Angle | 45° | |||
| Seat Width | .036-.051" (0.90-1.30 mm) | |||
| Exhaust Valve | ||||
| Seat Angle | 45° | |||
| Seat Width | .036-.051" (0.90-1.30 mm) | |||
| Valve Guides | ||||
| Intake Valve | ||||
| Valve Guide I.D. | .2366-.2374" (6.010-6.030 mm) | |||
| Valve Guide Installed Height | .532-.555" (13.50-14.10 mm) | |||
| Valve Stem-To-Guide Oil Clearance | ||||
| Standard | .0010-.0024" (.025-.060 mm) | |||
| Maximum | .004" (.10 mm) | |||
| Exhaust Valve | ||||
| Valve Guide I.D. | .2366-.2374" (6.010-6.030 mm) | |||
| Valve Guide Installed Height | .532-.555" (13.50-14.10 mm) | |||
| Valve Stem-To-Guide Oil Clearance | ||||
| Standard | .0012-.0026" (.030-.065 mm) | |||
| Maximum | .004" (.10 mm) | |||