LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Timing Chain Assembly >> Crankshaft Position (CKP) Sensor Pulse Wheel Assembly Note

Crankshaft Position (CKP) Sensor Pulse Wheel Assembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the "FRONT" mark of the pulse wheel facing you, install the crankshaft position (CKP) sensor pulse wheel using the keyway on the same side as the empty space shown in figure.
    Fig 1: Installing Crankshaft Position (CKP) Sensor Pulse Wheel
    G03643732Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals