LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Oil Control Valve (OCV) Inspection >> Coil Resistance Inspection

Coil Resistance Inspection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect the Oil Control Valve (OCV) connector.
  3. Measure the resistance between terminals A and B using an ohmmeter.
    • If not as specified, replace the Oil Control Valve (OCV).

      Specification 

      7.05-7.95 ohms 

  4. Connect the Oil Control Valve (OCV) connector.
    Fig 1: Identifying OCV Connector Terminals
    G02831305Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals