LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Cylinder Head Assembly (I) >> Valve Seal Assembly Note

Valve Seal Assembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the valve seal onto the valve guide by hand.
  2. Lightly tap the SST  using a plastic hammer.
    Fig 1: Installing Valve Seal
    G02831327Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals