LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Manual Transaxle - Service, Removal & Installation) >> Vehicle Speedometer Sensor Removal/Installation

Vehicle Speedometer Sensor Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner component, battery and battery box.
  3. Disconnect the vehicle speedometer sensor connector.
  4. Remove the vehicle speedometer sensor.
  5. Apply transaxle oil to a new O-ring and install it on a new vehicle speedometer sensor.
  6. Install the vehicle speedometer sensor.

    Tightening Torque 

    7.9-11.2 N.m {80-115 kgf.cm, 69.5-99.8 in.lbf} 

  7. Connect the vehicle speedometer sensor connector.
  8. Install the battery, battery box and air cleaner component.
  9. Connect the negative battery cable.
scientia non olet · About LEMON Manuals