Transaxle Side

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Position the marking on the oil hose side facing up and install it.

Fig 1: Positioning Oil Cooler Hoses At Transaxle (1 Of 2)
Courtesy of MAZDA MOTORS CORP.
Align the marks, and slide the oil hose onto oil pipe until it is fully seated as shown.

Fig 2: Positioning Oil Cooler Hoses At Transaxle (2 Of 2)
Courtesy of MAZDA MOTORS CORP.