LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Automatic Transaxle - Service, Removal & Installation [GF4A-El]) >> O/D Off Indicator Light Inspection >> Inspection Of Operation

Inspection Of Operation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch from OFF to ON.
    NOTE:
    • The O/D OFF indicator light will illuminate if a malfunction exists in any of the EC-AT system components.
  2. Verify that the O/D OFF indicator light is not illuminated.
  3. Press the switch and verify that the O/D OFF indicator illuminates.
    • If the O/D OFF switch function is not as specified, after checking the O/D OFF switch, see O/D OFF SWITCH INSPECTION , check the terminal voltage of the O/D OFF indicator light.
scientia non olet · About LEMON Manuals