LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Automatic Transaxle - Service, Removal & Installation [GF4A-El]) >> Automatic Transaxle Removal/Installation >> No. 1 Engine Mount Bolts Installation Note

No. 1 Engine Mount Bolts Installation Note

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Align the transaxle bolt holes and the engine mount exactly. Any misalignment can result in bolts and bolt holes becoming damaged or stripped during installation.
  1. Use the SST  (engine support) to make sure the transaxle bolt holes and No. 1 engine mount align.
  2. Tighten the bolts to the specified torque.
scientia non olet · About LEMON Manuals