LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Automatic Transaxle - Service, Removal & Installation [La4A-El]) >> Oil Cooler Removal/Installation >> Notes

Oil Cooler Removal/Installation: Notes

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Drain the ATF. See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .
  3. Remove the front bumper.
  4. Remove in the order shown in the figure.
  5. Install in the reverse order of removal.
  6. Add ATF to the specified level. See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT .
  7. Connect the negative battery cable.
  8. Inspect for oil leakage from the oil pipes and oil hoses.
  9. Inspect the ATF level and condition. See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION .
  10. Carry out the line pressure test. See LINE PRESSURE TEST .
  11. Carry out the road test. See ROAD TEST .
scientia non olet · About LEMON Manuals