LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Automatic Transaxle - Service, Removal & Installation [La4A-El]) >> Electrical System Test >> Transaxle Tester Instruction >> Resistance/Continuity Test-Turbine Shaft Speed (TSS) Sensor

Resistance/Continuity Test-Turbine Shaft Speed (TSS) Sensor

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set an ohmmeter to the 1,000 ohm range.
  2. Connect the positive lead to the + TSS jack.
  3. Connect the negative lead to the - TSS jack.
    Fig 1: Connecting Ohmmeter To Tester
    G01136995Courtesy of MAZDA MOTORS CORP.
  4. Record the resistance.
  5. TSS should be 140-290 ohm. 
    • If out of specified range, refer to the DTC troubleshooting. See DIAGNOSTIC TESTS .
scientia non olet · About LEMON Manuals