3-2 Timing/Coasting Clutch (3-2T/CCS) Engagement

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This test should be performed on the road. If it is performed on the hoist, a technician may not feel the 3-2 timing/coasting clutching disengage.

Accelerate and upshift the vehicle into third gear. Go to closed throttle. Depress the 3-2T/CCS switch.
- Did the 3-2 timing/coasting clutch disengage?
- Did the 3-2T/CCS solenoid deactivate (light on)?
  
  Fig 1: Depressing 3-2T/CCS Switch
  Courtesy of MAZDA MOTORS CORP.
Press lightly on the throttle, then release the 3-2T/CCS switch.
- Did the 3-2 timing/coasting clutch engage?
- Did engine braking occur?
- Did the 3-2 T/CCS solenoid activate (light off)?

NOTE:

Coast clutch engagement at closed throttle will be harsh.