Clutch Master Cylinder: Reassembly
WARNING: This page is about a different car, the 2001 Mazda Tribute, 2001 Mazda Protege, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
Apply clean brake fluid to primary and secondary cups and cylinder bore. Install NEW elbow joint bushing, hose clamp, snap ring, primary cup and secondary cup assembly "O" ring. To complete reassembly, reverse disassembly procedure. Bench bleed clutch master cylinder before installation. Bleed system at clutch release cylinder after installation. See BLEEDING CLUTCH HYDRAULIC SYSTEM .