LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 247 (Seat Belt System) >> Front Seat Belt Removal/Installation >> Pre-Tensioner Seat Belt Connector Removal Note

Pre-Tensioner Seat Belt Connector Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a flathead screwdriver, pry out the pre-tensioner seat belt connector stopper plate.
  2. Disconnect the pre-tensioner seat belt connector.
    Fig 1: Removing Pre-Tensioner Seat Belt Connector
    G01346290Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals