LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Lighting System) >> Ashtray Illumination Bulb Removal/Installation

Ashtray Illumination Bulb Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the ashtray panel. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the socket, then remove the ashtray illumination bulb.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Ashtray Illumination Bulb
    G01344605Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals