LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Differentials & Axle Shafts) >> Removal & Installation >> Stub Shaft Pilot Bearing And Seal >> Removal

Stub Shaft Pilot Bearing And Seal: Removal

WARNING: This page is about a different car, the 2001 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove halfshaft assembly. Using a Bearing Cup Remover (308-125) and a Impact Slide Hammer (100-001), remove stub shaft pilot bearing and seal.

scientia non olet · About LEMON Manuals