Stub Shaft Pilot Bearing And Seal: Installation

WARNING: This page is about a different car, the 2001 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Inspect inboard CV joint seal journal for rust or nicks/scratches prior to installing halfshaft. Polish seal journal with a fine crocus cloth, if necessary.

Lubricate new stub shaft pilot bearing with rear axle lubricant. Using Axle Bearing Replacer (205-195) and Handle (205-153), install the stub shaft pilot bearing. Lubricate net stub shaft pilot bearing housing seal with premium long-life grease. Using Axle Seal Replacer (205-350) and handle, install stub shaft pilot bearing housing seal. Install halfshaft assembly.