LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Automatic Transaxle [Service, Removal & Installation]) >> Automatic Transaxle Removal/Installation >> Spring Installation Note

Spring Installation Note

WARNING: This page is about a different car, the 2004 Mazda MPV, 2003 Mazda MPV, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Install the selector lever to the manual shaft lever with the spring side of the selector cable end facing the upward of the vehicle.
  1. Install the selector lever to the manual shaft lever in such a way that the selector cable does not bear a load.
  2. Confirm that the end of the manual shaft lever sticks out of the end of the selector cable.
    Fig 1: Connecting Selector Lever To Manual Shaft Lever
    G01883459Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals